Dimensions: Width 142 mm, Height 61 mm, Depth 66 mm, Weight 235 g. With the appropriate adaptor set all BETA 4 NT and BETA 4 SLIM NT rechargeable handles can be charged in the NT 4 table charger. The same applies to all Standard F.O. 4 NT, F.O. 4 SLIM NT and F.O. 4 SHORT NT laryngoscope rechargeable handles.

• Innovative, compact design. Practical and space-saving.
• Two independent charging compartments. Complete functionality for one or two handles at a time.
• Automatic charging. Independent of the state of charge of the rechargeable battery. Guarantees extended battery life.
• Cannot be overcharged. Charger switches off automatically when the battery is fully charged.
• Charge status display. Light pulses from the charging compartment to confirm the charging mode.

without handle, with adaptor. For BETA 4 NT rechargeable handles, Standard F.O. 4 NT and F.O. 4 SHORT NT laryngoscope
rechargeable handles. BETA 4 SLIM NT rechargeable handles and F.O. 4 SLIM NT laryngoscope rechargeable handles (Adaptor set required X-000.99.086).

100-240V, 50-60 Hz, Plug selectable for AU, UK, EU, USA (Please specify when ordering)

Rechargeable handle complete with

• Li-ion rechargeable battery
• HEINE BETA4 NT bottom insert
• Table charger HEINE NT4

Rechargeable handle complete with rechargeable battery M3Z 4 NT Li-ion and BETA 4 SLIM NT bottom insert

• Dimensions: 135 mm x 19 mm dia. Weight: 180 g.
• A compact handle with automatic connector for those who prefer a slim handle.
• Rechargeable in NT 4 table charger fitted with the small adaptor ring.

NT4 table charger not included

Rechargeable handle complete with

• Li-ion rechargeable battery
• HEINE BETA4 USB bottom insert
• USB cord with medical approved plug-in power supply
• handle rest
• 100-240V, 50-60 Hz, Plug selectable for AU, UK, EU, USA (Please specify when ordering)

Maximum safety and flexibility. You can charge your HEINE BETA4 USB Handle with any USB plug or other USB power source, with absolute peace of mind. The integrated, exclusive Galvanic Separation Module protects the handle, and the user, even if a faulty or inferior plug is used, preventing the possibility of the full mains voltage flowing directly to the handle. Li-ion technology: no “memory effect”. Charge your handle how you like without worrying about charge level or battery condition. High capacity: more than double the capacity compared to previous NiMH rechargeable batteries. Quick charge: approx. 4 hours to recharge. High quality metal construction for strength and durability. 

Not compatible with the NT 300 table charger and the previous generations.

• 145 mm x 30 mm dia.
• A BETA battery handle can also be converted to a rechargeable handle in this way.
• All BETA handles feature short-circuit protection and a continuous ceramic brightness control.

• Dimensions: 135 mm x 19 mm dia. Weight: 180 g.
• A compact handle with automatic connector for those who prefer a slim handle.
• for 2 alkali-manganese batteries, size AA (Batteries not included).

USB Cord with HEINE E4-USB plug-in power supply with medical approval

Plug selectable for AU, UK, EU, USA (Please specify when ordering)

The HEINE Transformer for mPack UNPLUGGED is an essential accessory designed to provide reliable and efficient power to your HEINE mPack UNPLUGGED medical devices. This compact, yet powerful transformer is specifically engineered to ensure that your medical equipment operates seamlessly, offering you uninterrupted service during critical procedures.

100-240V, 50-60 Hz, with plug for US, GB, AU, EU

Table charging station for HEINE DELTA 30 Dermatoscope

Plug selectable for AU, UK, EU, USA (Please specify when ordering)

For simple conversion of an older HEINE BETA R rechargeable handle or a BETA TR rechargeable handle (both discontinued) to the current generation of BETA4 USB rechargeable handles featuring modern Li-ion technology.  Including a Li-ion L rechargeable battery, compatible BETA4 USB bottom insert, USB cable, E4-USB mains adapter and handle rest.

Power plugs available: EU, UK, US, AU (Please specify when ordering)

Charger and wall-mount in one. The wall transformer serves as an instrument holder and a charger at the same time. 

Intelligent charging system. The instrument automatically switches off and goes into charging mode when placed in wall transformer. It is impossible to overcharge the mPack UNPLUGGED; the process ends automatically when charging is completed. 

Simultaneous charging. The charging system charges the battery on the headband as well as an additional single spare battery. 

Compatible transformer (100 – 240 V). Multi-voltage power supply unit incl. plug US, GB, AU, EU

Registered Design.

HEINE OMEGA 600 charging set includes CC1 charging case, CB1 charging battery 

For simple conversion of a BETA L rechargeable handle to a BETA4 NT rechargeable handle with modern Li-ion technology. Including a compatible BETA4 NT bottom insert and one NT4 table charger (with two separate charging wells for charging two BETA4 NT handles simultaneously).

Power plugs available: EU, UK, US, AU (Please specify when ordering)

The handle module is the basis of every BETA handle, 145 mm x 30 mm Ø, (without bottom)

By adding the appropriate bottom inserts it is possible to assemble any of the handles shown on this page. A BETA battery handle can also be converted to a rechargeable handle in this way.

All BETA handles feature short-circuit protection and a continuous ceramic brightness control

Extension cable between HEINE instrument and BETA handle, 1.3 m

HEINE E4-USBC power supply

Easy plug-in power supply with USB-C cable, approved for medical use.

Power plugs available: EU, UK, US, AU (Please specify when ordering)

HEINE Connecting cord cinch to EN 50 charger or mPack or plug-in transformer for HC 50L

Longitude 1.6 m

HEINE extension cord from plug-in transformer UNPLUGGED to mPack UNPLUGGED

Longitude 2 m

HEINE BETA4 NT with Ready-to-use function. Handles switch ON & OFF automatically when placed into charger. Set your desired brightness level once and it stays there every time you use your instrument. Also prevents battery damage and premature bulb burn outs if the instruments are accidentally left on

Not compatible with the NT 300 table charger and the previous generations.

Maximum safety. You can charge your HEINE BETA4 USB handle with any USB plug or other USB power source, with absolute peace of mind. The BETA4 USB handle has an integrated, exclusive galvanic separation module that protects the handle, and the user, even if a faulty or inferior plug is used; thus preventing the possibility of the full mains voltage flowing directly to the handle. We do however recommend the use of a medical approved plug-in power supply

Rechargeable handle complete with

• Li-ion rechargeable battery
• HEINE BETA4 NT bottom insert

Ready-to-use function. Handles switch ON & OFF automatically when placed into charger. Set your desired brightness level once and it stays there every time you use your instrument. Also prevents battery damage and premature bulb burn outs if the instruments are accidentally left on

for charge in NT4 table charger

Not compatible with the NT 300 table charger and the previous generations.

Upgrade-kit HEINE indirect ophthalmoscopes OMEGA 500 with LED module and HC 50L

With this upgrade kit, you can transform your HEINE OMEGA 500 XHL ophthalmoscope into a modern LED instrument.

For simple conversion of a HEINE BETA NT rechargeable handle (with NiMH rechargeable battery) to a BETA4 NT rechargeable handle with modern Li-ion technology.

Power plugs available: EU, UK, US, AU (Please specify when ordering)

The HEINE Transformer for mPack is an essential accessory designed to provide reliable and efficient power to your HEINE mPack medical devices. This compact, yet powerful transformer is specifically engineered to ensure that your medical equipment operates seamlessly, offering you uninterrupted service during critical procedures.

100-240V, 50-60 Hz, with plug for US, GB, AU, EU

HEINE plug-in transformer for HC 50L headband rheostat

for use with OMEGA 500 and ML4

Power plugs available: EU, UK, US, AU (Please specify when ordering)

HEINE HC 50L headband rheostat (without plug-in transformer)

for use with OMEGA 500 ophthalmoscope and ML4 HeadLight

Practical charging station with a stylish design for HEINE BETA X instruments

With the X CS1 table charging station, BETA X Series instruments can be charged easily and efficiently, while remaining readily available for quick use.

• Always have a charged instrument close to hand
• Automatic charging process, regardless of the battery’s charge status
• Cannot be overcharged
• A stylish design for practical, stable storage

Practical charging station with a stylish design for HEINE BETA X instruments

With the X CS1 dual table charging station, BETA X Series instruments can be charged easily and efficiently, while remaining readily available for quick use.

• Two separate charging compartments. Two instruments can be charged at the same time, but can also be charged individually 
• Charge status indicator directly on the instrument
• Automatic charging process, regardless of the battery’s charge status. Ensures a long battery life.
• Cannot be overcharged: The charging process switches off automatically as soon as the battery is fully charged
• Dimensions: 160 x 105 x 87 mm

Plug-in power supply with cable

Cable with USB-C connection at both ends

Certified according to IEC 60601-1 “Medical electrical equipment” 

Charger and wall-mount in one. The wall transformer serves as an instrument holder and a charger at the same time. 

Intelligent charging system. The instrument automatically switches off and goes into charging mode when placed in wall transformer. It is impossible to overcharge the mPack UNPLUGGED; the process ends automatically when charging is completed. 

Simultaneous charging. The charging system charges the battery on the headband as well as an additional single spare battery. 

Compatible transformer (100 – 240 V). Multi-voltage power supply unit incl. plug US, GB, AU, EU

Registered Design.