Extension cable between HEINE instrument and BETA handle, 1.3 m

KRÜSS DR101-60 is a compact, mobile and splash-proof digital handheld refractometer. Thanks to the automatic temperature compensation for the BRIX scale, a reproducible measurement can be achieved even under changing ambient conditions. As a waterproof device, the DR101-60 meets the IP65 standard and can be cleaned under running water. The DR101-60 is used in the food and beverage industry, in pharmacies, laboratories and testing laboratories as well as in research and teaching.

• Precise concentration analysis with automatic temperature compensation
• Measurement range: nD 1.3330-1.4419 and 0-60%Brix
• Mobile automatic measurement at the touch of a button
• Reproducible measurement results that are not dependent on the user’s interpretation.
• Automatic temperature compensation (BRIX scale)
• Swift filling and cleaning
• With high-quality, fully chrome-plated measurement tray
• Robust housing and low device weight

• Refractometer with USB-interface and automatic temperature compensation
• Measurement range: nD 1.3330-1.5318 and 0-95%Brix
• High measurement accuracy: nD ±0.00015 and ±0.1 %Brix
• Can also be used to determine the salt content (%)
• Reproducible measurement results that are not dependent on the user’s interpretation.
• Optional automatic activation temperature compensation for all scales
• Swift filling and cleaning
• With high-quality, fully chrome-plated measurement tray
• Robust housing and low device weight
• Operation possible with Mains adaptor or battery

• 145 mm x 30 mm dia.
• A BETA battery handle can also be converted to a rechargeable handle in this way.
• All BETA handles feature short-circuit protection and a continuous ceramic brightness control.

The handle module is the basis of every BETA handle, 145 mm x 30 mm Ø, (without bottom)

By adding the appropriate bottom inserts it is possible to assemble any of the handles shown on this page. A BETA battery handle can also be converted to a rechargeable handle in this way.

All BETA handles feature short-circuit protection and a continuous ceramic brightness control

Only compatible with the NT 300 table charger and the previous generations.

• Dimensions: 135 mm x 19 mm dia. Weight: 180 g.
• A compact handle with automatic connector for those who prefer a slim handle.
• for 2 alkali-manganese batteries, size AA (Batteries not included).

HEINE BETA4 NT with Ready-to-use function. Handles switch ON & OFF automatically when placed into charger. Set your desired brightness level once and it stays there every time you use your instrument. Also prevents battery damage and premature bulb burn outs if the instruments are accidentally left on

Not compatible with the NT 300 table charger and the previous generations.

Rechargeable handle complete with

• Li-ion rechargeable battery
• HEINE BETA4 NT bottom insert

Ready-to-use function. Handles switch ON & OFF automatically when placed into charger. Set your desired brightness level once and it stays there every time you use your instrument. Also prevents battery damage and premature bulb burn outs if the instruments are accidentally left on

for charge in NT4 table charger

Not compatible with the NT 300 table charger and the previous generations.

Rechargeable handle complete with

• Li-ion rechargeable battery
• HEINE BETA4 NT bottom insert
• Table charger HEINE NT4

For simple conversion of a BETA L rechargeable handle to a BETA4 NT rechargeable handle with modern Li-ion technology. Including a compatible BETA4 NT bottom insert and one NT4 table charger (with two separate charging wells for charging two BETA4 NT handles simultaneously).

Power plugs available: EU, UK, US, AU (Please specify when ordering)

Rechargeable handle complete with rechargeable battery M3Z 4 NT Li-ion and BETA 4 SLIM NT bottom insert

• Dimensions: 135 mm x 19 mm dia. Weight: 180 g.
• A compact handle with automatic connector for those who prefer a slim handle.
• Rechargeable in NT 4 table charger fitted with the small adaptor ring.

NT4 table charger not included

Maximum safety. You can charge your HEINE BETA4 USB handle with any USB plug or other USB power source, with absolute peace of mind. The BETA4 USB handle has an integrated, exclusive galvanic separation module that protects the handle, and the user, even if a faulty or inferior plug is used; thus preventing the possibility of the full mains voltage flowing directly to the handle. We do however recommend the use of a medical approved plug-in power supply

Rechargeable handle complete with

• Li-ion rechargeable battery
• HEINE BETA4 USB bottom insert
• USB cord with medical approved plug-in power supply
• handle rest
• 100-240V, 50-60 Hz, Plug selectable for AU, UK, EU, USA (Please specify when ordering)

Maximum safety and flexibility. You can charge your HEINE BETA4 USB Handle with any USB plug or other USB power source, with absolute peace of mind. The integrated, exclusive Galvanic Separation Module protects the handle, and the user, even if a faulty or inferior plug is used, preventing the possibility of the full mains voltage flowing directly to the handle. Li-ion technology: no “memory effect”. Charge your handle how you like without worrying about charge level or battery condition. High capacity: more than double the capacity compared to previous NiMH rechargeable batteries. Quick charge: approx. 4 hours to recharge. High quality metal construction for strength and durability. 

Not compatible with the NT 300 table charger and the previous generations.

For simple conversion of an older HEINE BETA R rechargeable handle or a BETA TR rechargeable handle (both discontinued) to the current generation of BETA4 USB rechargeable handles featuring modern Li-ion technology.  Including a Li-ion L rechargeable battery, compatible BETA4 USB bottom insert, USB cable, E4-USB mains adapter and handle rest.

Power plugs available: EU, UK, US, AU (Please specify when ordering)

The cost-effective all-purpose loupe, Ideal for dental laboratories and general medical examination.

Working distance 340 mm

The cost-effective all-purpose loupe, Ideal for dental laboratories and general medical examination.

Working distance 450 mm

HEINE Connecting cord cinch to EN 50 charger or mPack or plug-in transformer for HC 50L

Longitude 1.6 m

Plug-in power supply with cable

Cable with USB-C connection at both ends

Certified according to IEC 60601-1 “Medical electrical equipment” 

USB Cord with HEINE E4-USB plug-in power supply with medical approval

Plug selectable for AU, UK, EU, USA (Please specify when ordering)

HEINE E4-USBC power supply

Easy plug-in power supply with USB-C cable, approved for medical use.

Power plugs available: EU, UK, US, AU (Please specify when ordering)

HEINE extension cord from plug-in transformer UNPLUGGED to mPack UNPLUGGED

Longitude 2 m

HEINE HC 50L headband rheostat (without plug-in transformer)

for use with OMEGA 500 ophthalmoscope and ML4 HeadLight